Model | TS-9120 |
Video input |
Interface | 15-pin HD female interface |
| 1Vpp component video or Y and composite video in S-video; |
Signal strength | 0.7Vpp RGB (computer signal); 0.3Vpp component video |
| Cb/Cr or Pb/Pr, C in S-video |
Min/max level | Analog signal: 0.5V ~ 2.0Vpp |
Impedance | 75 Ω |
Return loss | -30dB@5MHz |
Genlock | 0.3V-0.4Vpp |
Maximum DC offset error | 15mV |
Long-line driver interface part video |
Gain | Minimum 0.2dB (0~10MHz bandwidth) |
Maximum 1.8dB ((0 ~ 10MHz bandwidth) |
Minimum 0.4dB (10M ~ 400MHz bandwidth) |
Maximum>6dB (10 ~ 400MHz) |
Differential phase error | <2.0 degrees, 3.58MHz (only when the compensation file below 40 meters) |
Differential gain error | 0.3%, 3.58-4.43MHz (only when the compensation file below 40 meters) |
Maximum transmission delay | 5nS(±1nS) |
Signal type | RGBHV,RGBS,RGsB, RsGsBs,YPbPr/YCbCr, |
S-Video, composite video signal (CVBS) |
Long-line drive part of the video output |
Interface | BNC female interface |
Min/max level | Analog signal: 0.5V ~ 2.0Vpp |
Impedance | 75 Ω |
Return loss | -30dB@5MHz |
DC compensation | Maximum ±5mV |
Sync signal |
|
Input/output type | RGBHV, RGBS, RGsB, RsGsBs |
Input level | 0.5V- 5.0Vpp,: 4.0Vpp normal |
Output level | AGC-TTL: 5Vpp, unloaded (unterminated) |
Input impedance | 510 Ω / low impedance optional |
Output impedance | 75 Ω (monitoring output interface part); |
| 75 Ω (long-distant driver output interface part) |
Polarity | Positive or negative (exactly consistent with the input) |
Control type |
Method | Manually select each file, subject to subjective feelings. |
Specification |
|
Input power | DC 9V 1.5A |
Operating temperature | -20℃~ +70℃ |
Environment humidity | 20%~80% relative humidity, no condensation |
Installation | Hanging installation |
Dimension (LxWxH) | 163x152x32mm |